High-tech enterprise ISO9001&ISO14001 Dual authentication enterprise


ModelProduct NameExecutive
 standard
For industry
67
Foam Aerosol Spray Adhesive
GB18583-2008

lightweight materials suac as Glass fibre, wind torbin blade, foam,etc.



Main Ingredients

Synthetic resin, synthetic rubber, thicken resin, environment-friendly solvent oil, butane, propane, dimethyl ether etc.

 

Uses

Used for bonding the surface of lightweight materials such as EPS, Polystyrene foam, etc.

 

Advantages

Fast and aggressive tack and easy application.

High solids and spray on larger area(1.5 - 2 times) than the current similar spray adhesive.

The spraying grain is thin and even, low penetration, not corrode materials and save adhesive.

15-20 minutes of leading time, enhance work flexibility and improve efficiency.

Widely used for factory, company and home.

 

Precautions

This product is packed under pressure, and is easy to explode when it is near heat.

Store away from heat and fire source, or store out of direct sunlight for long time.

Please keep the product out of kid’s reach.

After finish the adhesive inside dump at the place there is no people and puncture the tank wall with iron nail.

Store it under 49℃ in well ventilated and cool place.

Contact with eye, wash with a mount of water and see doctor immediately. Contact with skin, wash with soap and water.

 

Storage

2 years in normal temperature. If the adhesive does not go bad after 2 years, it still can be used.

 

Executive Standard

National standard: GB18583-2008       

Enterprise standard: Q/TQ003-2008


xmessage

  
Friendship Links